Chapter 9 System
NWA1121-NI User’s Guide
106
Click System > Certificates. The following screen shows.
Figure 50 System > Certificates
The following table describes the labels in this screen.
9.6 Telnet Screen
Use this screen to configure your NWA1121-NI for remote Telnet access. You can use Telnet to
access the NWA1121-NI’s Command Line Interface (CLI).
Click System > Telnet. The following screen displays.
Figure 51 System > Telnet
Table 31 System > Certificates
LABEL DESCRIPTION
Import Certificate
Import
Certificate
Enter the location of a previously-saved certificate to upload to the NWA1121-NI.
Alternatively, click the Browse button to locate a list.
Browse Click this button to locate a previously-saved certificate to upload to the NWA1121-NI.
Import Click this button to upload the previously-saved certificate displayed in the Import
Certificate field to the NWA1121-NI.
Delete Certificate
You can delete a
certificate
Select the certificate from the list that you want to delete.
Delete Click this to delete the selected certificate.
To Next Page
Loading...
