Chapter 11 Maintenance
NWA1121-NI User’s Guide
124
11.8 Configuration File Screen
Use this screen to backup, restore and reset the configuration of your NWA1121-NI.
Click Maintenance > Configuration File. The screen appears as shown next.
Figure 65 Maintenance > Configuration File
11.8.1 Backup Configuration
Backup configuration allows you to back up (save) the NWA1121-NI’s current configuration to a file
on your computer. Once your NWA1121-NI is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Click Backup to save the NWA1121-NI’s current configuration to your computer.
11.8.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your NWA1121-NI.
Do not turn off the NWA1121-NI while configuration file upload is in
progress.
You must then wait one minute before logging into the NWA1121-NI again.
Table 40 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Browse... Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
To Next Page
Loading...
