Chapter 4 Tutorial
NWA1121-NI User’s Guide
44
4 Go to Wireless LAN > Security to configure the NWA1121-NI to use the same security mode and
Pre-Shared Key as NWA1121-NI (A): WPA-PSK/ThisisMyPreSharedKey. Click Apply.
Figure 12
4.3.4 MAC Filter Setup
One way to ensure that only specified wireless clients can access the FTP server is by enabling MAC
filtering on NWA1121-NI (B) (See Section 6.8 on page 89 for more information on MAC Filter).
1 Go to Wireless LAN > MAC Filter. Click the Edit icon next to MacProfile1.
2 Select Allow in the Access Control Mode field. Enter the MAC addresses of the wireless clients
(W, Y and Z) you want to associate with the NWA1121-NI. Click Apply.
Now, only the authorized wireless clients (W, Y and Z) can access the FTP server.
To Next Page
Loading...
