Chapter 10 Log Settings
NWA1121-NI User’s Guide
117
To change your NWA1121-NI’s log settings, click Configuration > Log Settings. The screen
appears as shown.
Figure 57 Log Settings
The following table describes the labels in this screen.
Table 35 Log Settings
LABEL DESCRIPTION
E-mail Log Settings
Mail Server Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
e-mail.
Mail Subject Type a title that you want to be in the subject line of the log e-mail message that the
NWA1121-NI sends.
Send Log to Logs are sent to the e-mail address specified in this field. If this field is left blank, logs
will not be sent via e-mail.
To Next Page
Loading...
