Chapter 6 Wireless LAN
NWA1121-NI User’s Guide
82
6.6.3.2 Wireless Client
Use this screen to use 802.1x-Only security mode for your NWA1121-NI that is in wireless client
operating mode. Select 802.1X-Static WEP in the Security Mode field to display the following
screen.
Figure 32 Security: 802.1X-Static WEP for Wireless Client
The following table describes the labels in this screen.
Table 20 Security: 802.1X-Static WEP for Wireless Client
LABEL DESCRIPTION
Security Settings
Profile Name This is the name that identifying this profile.
Security Mode Choose the same security mode used by the AP.
To Next Page
Loading...
