ZyXEL Communications NWA 1121-NI - Page 85

Chapter 6 Wireless LAN
NWA1121-NI User’s Guide
85
6.6.4.2 Wireless Client
Use this screen to employ WPA or WPA2 as the security mode for your NWA1121-NI that is in
wireless client operating mode. Select WPA or WPA2 in the Security Mode field to display the
following screen.
Figure 34 Security: WPA for Wireless Client
The following table describes the labels in this screen.
Table 22 Security: WPA/WPA2 for Wireless Client
LABEL DESCRIPTION
Security Settings
Profile Name This is the name that identifying this profile.
Security Mode Choose the same security mode used by the AP.
Data Encryption This shows the encryption method used by the NWA1121-NI.
IEEE802.1x Authentication
Eap Type The options on the left refer to EAP methods. You can choose either TLS, LEAP, PEAP or
TTLS.
If you select TTLS or PEAP, the options on the right refer to authentication protocols. You
can choose between PAP, CHAP, MSCHAP, MSCHAPv2 and/or GTC.
User Information
Username
Login Name
Supply the user name of the account created in the RADIUS server.
Password Supply the password of the account created in the RADIUS server.
Certificate
User Certificate If you select TLS, enter the name of the certificate used to to verify the identity of clients.