ZyXEL Communications nwa series - Chapter 10: Wireless; 10.1 Overview

NWA/WAC/WAX Series User’s Guide
117
CHAPTER 10
Wireless
10.1 Overview
This chapter discusses how to configure the WiFi network settings in your Zyxel Device.
The following figure provides an example of a WiFi network.
Figure 72 Example of a WiFi Network
The WiFi network is the part in the blue circle. In this WiFi network, devices A and B are called WiFi clients.
The WiFi clients use the access point (AP) to interact with other devices (such as the printer) or with the
Internet. Your Zyxel Device is the AP.
10.1.1 What You Can Do in this Chapter
• The AP Management screen (Section 10.2 on page 118) allows you to manage the Zyxel Device’s
general WiFi settings.
• The Rogue AP screen (Section 10.3 on page 124) allows you to assign APs either to the rogue AP list or
the friendly AP list.
• The Load Balancing screen (Section 10.4 on page 128) allows you to configure network traffic load
balancing between the APs and the Zyxel Device.
• The DCS screen (Section 10.5 on page 131) allows you to configure dynamic radio channel selection.