Chapter 20 Diagnostics
NWA/WAC/WAX Series User’s Guide
244
Figure 150 Maintenance > Diagnostics: Debug Information Collector
20.3 Remote Capture
Use this screen to capture network traffic going through the Zyxel Device and output the captured
packets to a packet analyzer (also known as network or protocol analyzer) such as Wireshark. If the
Zyxel Device is connected to the Zyxel gateway or ZyWALL, you might need to configure the Zyxel
gateway or ZyWALL to allow remote capture on the Zyxel Device.
Not all models support wireless remote capture. See Section 1.2 on page 14 for models that support
remote capture on wireless interfaces.
Click Maintenance > Diagnostics > Remote Capture to open the Remote Capture screen.
Figure 151 Maintenance > Diagnostics > Remote Capture
Figure 152 Maintenance > Diagnostics > Remote Capture (Zyxel Device that supports Wireless Remote
Capture)
To Next Page
Loading...
