Chapter 7 Setup Wizard
NWA/WAC/WAX Series User’s Guide
84
Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard
without saving.
Note: The number of characters shown is not an actual representation of your current
password. If you click Next without changing password in the New Password and
Confirm Password fields, your current password will not be changed.
Figure 44 Wizard: Change Password and Uplink Connection
7.2.3 Step 3 SSID
Use this screen to enable, disable or edit an SSID profile.
Select an SSID profile and click the Status switch to turn it on or off. To change an SSID profile’s settings,
such as the SSID (WiFi network name) and WiFi password, double-click the SSID profile entry from the list.
See Section 7.2.3.1 on page 85 for more information.
Note: You cannot add or remove an SSID profile after running the setup wizard.
Figure 45 Wizard: SSID
To Next Page
Loading...
