ZyXEL Communications nwa series - Chapter 14 MON Profile; MON Profile; Overview; What You Can Do in this Chapter

NWA/WAC/WAX Series User’s Guide
177
CHAPTER 14
MON Profile
14.1 Overview
This screen allows you to set up monitor mode configurations that allow your Zyxel Device to scan for
other wireless devices in the vicinity. Once detected, you can use the Wireless > MON Mode screen
(Section 10.3 on page 124) to classify them as either rogue or friendly.
Not all Zyxel Devices support monitor mode and rogue APs detection.
14.1.1 What You Can Do in this Chapter
The MON Profile screen (Section 14.2 on page 177) creates preset monitor mode configurations that can
be used by the Zyxel Device.
14.2 MON Profile
This screen allows you to create monitor mode configurations that can be used by the APs. To access
this screen, log into the Web Configurator, and click Configuration > Object > MON Profile.
Figure 109 Configuration > Object > MON Profile
The following table describes the labels in this screen.
Table 72 Configuration > Object > MON Profile
LABEL DESCRIPTION
Add Click this to add a new monitor mode profile.
Edit Click this to edit the selected monitor mode profile.
Remove Click this to remove the selected monitor mode profile.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.