Chapter 16 Certificates
NWA/WAC/WAX Series User’s Guide
188
If you configured the Add My Certificates screen to have the Zyxel Device enroll a certificate and the
certificate enrollment is not successful, you see a screen with a Return button that takes you back to the
Add My Certificates screen. Click Return and check your information in the Add My Certificates screen.
Make sure that the certification authority information is correct and that your Internet connection is
working properly if you want the Zyxel Device to enroll a certificate online.
16.2.2 Edit My Certificates
Click Configuration > Object > Certificate > My Certificates and then the Edit icon to open the My
Certificate Edit screen. You can use this screen to view in-depth certificate information and change the
certificate’s name.
OK Click OK to begin certificate or certification request generation.
Cancel Click Cancel to quit and return to the My Certificates screen.
Table 77 Configuration > Object > Certificate > My Certificates > Add (continued)
LABEL DESCRIPTION
To Next Page
Loading...
