ZyXEL Communications nwa series - WAC500, WAC500 H, Nwa1123 Acv3, NWA110 AX, NWA210 AX, WAX510 D, WAX610 D, WAX630 S and WAX650 S

Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
46
3.3.4 WAC500, WAC500H, NWA1123ACv3, NWA110AX, NWA210AX,
WAX510D, WAX610D, WAX630S and WAX650S
Figure 19 WAC500, NWA1123Acv3, NWA110AX, NWA210AX, WAX510D, WAX610D, WAX630S and
WAX650S LED
Red Steady On The Zyxel Device failed to boot up or is experiencing system
failure.
Slow Blinking (Blink for 3
times, Off for 3s)
The Uplink interface is down.
Fast Blinking (On for 50 ms,
Off for 50 ms)
The Zyxel Device is undergoing firmware upgrade.
Table 12 NWA5123-AC LED (continued)
COLOR STATUS DESCRIPTION