ZyXEL Communications nwa series - Page 47

Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
47
Figure 20 WAC500H LED
The following are the LED descriptions for your WAC500, WAC500H, NWA1123ACv3, NWA110AX,
NWA210AX, WAX510D, WAX610D, WAX630S and WAX650S.
Table 13 WAC500, WAC500H, NWA1123ACv3, NWA110AX, NWA210AX, WAX510D, WAX610D, WAX630S
and WAX650S LED
COLOR STATUS DESCRIPTION
Amber Blinks between amber
and green alternately (1
second interval).
The Zyxel Device is booting up or is connecting with NCC.
Green
Amber Blinks between amber
and green alternately 3
times and then turns solid
green for 3 seconds.
The Zyxel Device is discovering the NCC or an AC.
Green
Amber Blinks between amber
and green alternately 2
times and then turns solid
green for 3 seconds.
The Zyxel Device is managed by an AC but the uplink is
disconnected.
Green
Green Slow Blinking (On for 1
second, Off for 1 second)
The wireless module of the Zyxel Device is disabled or fails, the
Zyxel Device is using default WiFi settings, or the Zyxel Device is
configured to be managed by NCC but is not yet registered
with the NCC.
Note: WiFi networks on the WAX650S are turned off
automatically when it is connected to a device
that supplies power using IEEE 802.3af PoE.