Chapter 20 Diagnostics
NWA/WAC/WAX Series User’s Guide
245
The following table describes the labels in this screen.
Table 102 Maintenance > Diagnostics > Remote Capture
LABEL DESCRIPTION
Server Port Enter the number of the server port you want the packet analyzer to connect to in order to
capture traffic going through the Zyxel Device. The default port number is 2002.
Start Click this button to allow the packet analyzer to start capturing traffic going through the Zyxel
Device.
Stop Click this button to stop the packet analyzer from capturing traffic going through the Zyxel
Device.
To Next Page
Loading...
