Chapter 13 AP Profile
NWA/WAC/WAX Series User’s Guide
157
Figure 97 Configuration > Object > AP Profile > SSID > SSID List > Add/Edit SSID Profile
The following table describes the labels in this screen.
Table 60 Configuration > Object > AP Profile > SSID > SSID List > Add/Edit SSID Profile
LABEL DESCRIPTION
Create new
Object
Select an object type from the list to create a new one associated with this SSID profile.
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the
Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
SSID Enter the SSID name for this profile. This is the name visible on the network to WiFi clients. Enter
up to 32 characters, spaces and underscores are allowed.
Band Select the radio bands to which the SSID profile is applicable.
The profile will only work on the radio bands you select. For example, you select 5G for the SSID
profile “Wiz_SSID_1”, and apply it on radio 2 (with a radio profile using the 6 GHz band). The SSID
profile will not take effect until you set the radio to use the 5 GHz band.
To Next Page
Loading...
