Chapter 13 AP Profile
NWA/WAC/WAX Series User’s Guide
165
Figure 101 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: wpa2
Interim Update
Interval
Specify the time interval for how often the Zyxel Device is to send a subscriber status
update to the accounting server.
General Server Settings
NAS IP Address If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
IP address attribute, enter it here.
NAS Identifier If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
identifier attribute, enter it here. The NAS identifier is to identify the source of access
request. It could be the NAS’s fully qualified domain name.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Table 64 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: wep (continued)
LABEL DESCRIPTION
To Next Page
Loading...
