Chapter 4 Web Configurator
NWA/WAC/WAX Series User’s Guide
63
Figure 30 Login Page in Standalone Mode
4 Enter the user name (default: “admin”) and password (default: “1234”).
Note: If the Zyxel Device is being managed or has been managed by the NCC, check Local
credentials in the NCC's Site-Wide > Configure > General settings screen for the Zyxel
Device's current password.
5 Select the language you prefer for the Web Configurator. Click Login.
6 The wizard screen opens when the Zyxel Device is accessed for the first time or when you reset the Zyxel
Device to its default factory settings.
7 If you logged in using the default user name and password, the Update Admin Info screen appears.
Otherwise, the dashboard appears.
Note: In some firmware versions, it is not mandatory to change the default password.
However, it is highly recommended that you change the default password after the first
login.
To Next Page
Loading...
