NWA1100-N User’s Guide 119
CHAPTER 15
Maintenance
15.1 Overview
This chapter describes the maintenance screens. It discusses how you can view the association list
and channel usage, upload new firmware, manage configuration and restart your NWA without
turning it off and on.
15.2 What You Can Do in this Chapter
•Use the Client Information screen to view the wireless clients that are currently associated
with the NWA (see Section 15.4 on page 119) .
•Use the Channel Scan screen to view whether a channel is used by another wireless network or
not. If a channel is being used, you should select a channel removed from it by five channels to
completely avoid overlap (see Section 15.5 on page 120).
•Use the F/W Upload screen to upload the latest firmware for your NWA (see Section 15.6 on
page 121).
•Use the Configuration File screen to view information related to factory defaults, backup
configuration, and restoring configuration (see Section 15.7 on page 123).
•Use Reboot screen to reboot the NWA without turning the power off (see Section 15.8 on page
125).
15.3 What You Need To Know
You can find the firmware for your device at www.zyxel.com. It is a file that (usually) uses the
system model name with a "*.bin" extension, for example "[Model #].bin". The upload process uses
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
15.4 Client Information Screen
Use this screen to view the wireless stations that are currently associated with the NWA.
To Next Page
Loading...
