EasyManua.ls Logo

ZyXEL Communications nwa1100-n - System Statistics Screen

ZyXEL Communications nwa1100-n
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Status Screens
NWA1100-N User’s Guide
25
3.1.1 System Statistics Screen
Use this screen to view read-only information, including Wireless Mode, Channel ID, Retry Count
and FCS Error Count. Also provided is the "poll interval". The Poll Interval field is configurable.
The fields in this screen vary according to the current wireless mode of each WLAN adaptor.
Click Status > Statistics. The following screen pops up.
Figure 15 System Status: Statistics
The following table describes the labels in this screen.
Rate For the LAN port this displays Auto or the port speed and duplex setting that you
configured in the System > General screen.
For the WLAN interface, it displays the downstream and upstream transmission
rate or N/A if the interface is not in use.
SSID Status This is not available when the WLAN Operating Mode is Wireless Client.
Interface This column displays each of the NWA’s wireless interfaces.
SSID This field displays the SSID(s) currently used by each wireless module.
BSSID This field displays the MAC address of the wireless module.
Security This field displays the type of wireless security used by each SSID.
VLAN This field displays the VLAN ID of each SSID in use, or Disabled if the SSID does
not use VLAN.
System Status
Statistics Click this link to view port status and packet specific statistics. See Section 3.1.1 on
page 25.
Client Information Click this to see a list of wireless clients currently associated to each of the NWA’s
wireless modules. See Section 15.4 on page 119.
View Log Click this to see a list of logs produced by the NWA. See Chapter 14 on page 114.
Table 2 The Status Screen (continued)
LABEL DESCRIPTION
Table 3 System Status: Statistics
LABEL DESCRIPTION
Description This is the NWA’s wireless LAN module.
Wireless Mode This field shows which wireless standard the NWA is using.
Channel ID Click this to see which wireless channels are currently in use in the local area. See
Section 15.5 on page 120.
RX PKT This is the number of received packets on this port.

Table of Contents

Other manuals for ZyXEL Communications nwa1100-n

Related product manuals