ZyXEL Communications nwa1100-n - Configure the Standard Network

Chapter 4 Tutorial
NWA1100-N User’s Guide
32
4.2.2 Configure the Standard Network
1 Click Wireless > Multi SSID. Select SSID01 and click Edit.
2 Set the SSID to SSID01. Select SecProfile1 as SSID01’s security profile. Select the Hidden
SSID checkbox as you want only authorized company employees to use this network, so there is no
need to broadcast the SSID to wireless clients scanning the area.
Also, the clients on SSID01 might need to access other clients on the same wireless network. Do
not select the Enable Intra-BSS Traffic blocking check-box.
Click Save.