ZyXEL Communications nwa1100-n - Security: 802.1 X Only

Chapter 7 Wireless Security Screen
NWA1100-N User’s Guide
76
7.4.2 Security: 802.1x Only
This screen varies depending on whether you select Access Point, Multi SSID or Wireless Client
in the Wireless > Wireless Settings screen.
7.4.2.1 Access Point or Multi SSID
Use this screen to use 802.1x authentication with no data encryption for your NWA that is in
Access Point or Multi SSID operating mode. Select 802.1X in the Security Mode field to display
the following screen.
Figure 32 Security: 802.1x for Access Point or Multi SSID
The following table describes the labels in this screen.
Reset Click Reset to begin configuring this screen afresh.
Back Click Back to return to the previous screen.
Table 13 Security: WEP (continued)
LABEL DESCRIPTION
Table 14 Security: 802.1x for Access Point or Multi SSID
LABEL DESCRIPTION
Security Settings
Profile Name This is the name that identifying this profile.
Security Mode Choose 802.1X in this field.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Back Click Back to return to the previous screen.