Chapter 15 Maintenance
NWA1100-N User’s Guide
122
Do not turn off the NWA while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
NWA again.
Figure 66 Firmware Upload In Process
The NWA automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 67 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the F/
W Upload screen.
Figure 68 Firmware Upload Error
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Table 43 Firmware Upload (continued)
LABEL DESCRIPTION
To Next Page
Loading...
