NWA / WAC Series User’s Guide
115
CHAPTER 10
MON Profile
10.1 Overview
This screen allows you to set up monitor mode configurations that allow your NWA/WAC to scan for
other wireless devices in the vicinity. Once detected, you can use the Wireless > MON Mode screen
(Section 7.3 on page 80) to classify them as either rogue or friendly.
Not all NWA/WACs support monitor mode and rogue APs detection.
10.1.1 What You Can Do in this Chapter
The MON Profile screen (Section 10.2 on page 115) creates preset monitor mode configurations that can
be used by the NWA/WAC.
10.2 MON Profile
This screen allows you to create monitor mode configurations that can be used by the APs. To access
this screen, login to the Web Configurator, and click Configuration > Object > MON Profile.
Figure 70 Configuration > Object > MON Profile
The following table describes the labels in this screen.
Table 53 Configuration > Object > MON Profile
LABEL DESCRIPTION
Add Click this to add a new monitor mode profile.
Edit Click this to edit the selected monitor mode profile.
Remove Click this to remove the selected monitor mode profile.
Activate To turn on an entry, select it and click Activate.
To Next Page
Loading...
