Chapter 6 Network
NWA / WAC Series User’s Guide
70
• The AC (AP Controller) Discovery screen (Section 6.3 on page 71) configures the NWA/WAC’s AP
Controller settings.
6.2 IP Setting
Use this screen to configure the IP address for your NWA/WAC. To access this screen, click Configuration
> Network > IP Setting.
Figure 40 Configuration > Network > IP Setting (Retake screenshot)
Each field is described in the following table.
Table 30 Configuration > Network > IP Setting
LABEL DESCRIPTION
IP Address
Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address Enter the IP address for this interface.
To Next Page
Loading...
