Chapter 3 Setup Wizard
NWA / WAC Series User’s Guide
42
Figure 19 Wizard: Country Code
3.2.2 Time Zone
Use this screen to configure the NWA/WAC’s time zone and daylight saving time.
• Time Zone: Select the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
• Enable Daylight Saving: Select the option if you use Daylight Saving Time. Configure the day and time
when Daylight Saving Time starts and ends.
• Offset allows you to specify how much the clock changes when daylight saving begins and ends.
Enter a number from 1 to 5.5 (by 0.5 increments).
Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard
without saving.
To Next Page
Loading...
