NWA / WAC Series User’s Guide
41
CHAPTER 3
Setup Wizard
3.1 Accessing the Wizard
When you log into the Web Configurator for the first time or when you reset the NWA/WAC to its default
configuration, the wizard screen displays.
Note: If you have already configured the wizard screens and want to open it again, click the
Wizard icon on the upper right corner of any Web Configurator screen.
Note: At the time of writing, the wizard is available only on the NWA1123-ACv2 and NWA1123-
AC PRO.
3.2 Using the Wizard
This wizard helps you configure the NWA/WAC IP address, change time zone, daylight saving and radio
settings, and edit an SSID profile to change general wireless and wireless security settings.
3.2.1 Country Code
The welcome screen displays. Select the country where the NWA/WAC is located and click Next.
Note: You cannot change the country code if the NWA/WAC products comply with the U.S.
laws, policies and regulations and are to be sold to the U.S. market.
To Next Page
Loading...
