Chapter 1 Introduction
NWA / WAC Series User’s Guide
26
1.6.5 WAC5302D-S
The LEDs automatically turn off when the WAC5302D-S is ready. You can press the LED ON button for one
second to turn on the LEDs again. The LEDs will blink and turn off after two minutes.
Figure 9 WAC5302D-S LEDs
Amber Off The NWA is ready for use.
Green On
Amber Off The NWA’s wireless interface is activated.
Green On
Amber Slow Blinking (blink for 3
times, Off for 3s)
The NWA is discovering an AP controller.
Green On
Amber On The NWA failed to boot up or is experience system failure.
Green Off
Amber Fast Blinking (On for
50ms, Off for 50ms)
The NWA is undergoing firmware upgrade.
Green Off
Amber Slow Blinking (blink for 3
times, Off for 3s)
The Uplink port is disconnected.
Green Off
Amber Slow Blinking (blink for 2
times, Off for 3s)
The wireless LAN is disabled or fails.
Green Off
Table 9 NWA1123/5120 Series LED (continued)
COLOR STATUS DESCRIPTION
To Next Page
Loading...
