ZyXEL Communications NWA1123ACPRO-EU0101F - Chapter 7 Wireless; Overview; What You Can Do in this Chapter; Wireless

NWA / WAC Series User’s Guide
76
CHAPTER 7
Wireless
7.1 Overview
This chapter discusses how to configure the wireless network settings in your NWA/WAC.
The following figure provides an example of a wireless network.
Figure 44 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your NWA/WAC is the AP.
7.1.1 What You Can Do in this Chapter
• The AP Management screen (Section 7.2 on page 77) manages the NWA/WAC’s general wireless
settings.
• The MON Mode screen (Section 7.3 on page 80) allows you to assign APs either to the rogue AP list or
the friendly AP list.
• The Load Balancing screen (Section 7.4 on page 82) configures network traffic load balancing
between the APs and the NWA/WAC.
• The DCS screen (Section 7.5 on page 85) configures dynamic radio channel selection.