ZyXEL Communications Prestige 791R - Address Mapping Sets; Figure 11-5 NAT Setup

Prestige 791R G.SHDSL Router
11-8 NAT
Menu 15 — NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Enter Menu Selection Number:
SMT will use Set 1, which supports all mapping types as outlined in Table 11-2. When you select SUA
Only, the SMT will use the pre-configured Set 255 (read only).
The Server Set is a list of LAN side servers mapped to external ports. To use this set (one set for the
Prestige 10), a server rule must be set up inside the NAT Address Mapping set. Please see section 11.4 for
further information on these menus. To configure NAT, enter 15 from the main menu to bring up the
following screen.
Figure 11-5 NAT Setup
11.3.1 Address Mapping Sets
Enter 1 to bring up Menu 15.1 — Address Mapping Sets.