ZyXEL Communications Prestige 791R - Table 4-1 WAN Setup

Prestige 791R G.SHDSL Router
4-4 WAN
Table 4-1 WAN Setup
FIELD DESCRIPTION
Service Type
Press [SPACE BAR] to select Server (COE) or Client (CPE).
Rate Adaption
Press [SPACE BAR] to select Enable (activate) or Disable (deactivate).
Transfer Max Rate
(2312 Kbps)
Press [SPACE BAR] to select a Transfer Max Rate greater than or equal to
the Transfer Min Rate and press [ENTER] to continue.
Transfer Min Rate
(2312 Kbps)
Press [SPACE BAR] to select a Transfer Min Rate less than or equal to the
Transfer Max Rate and press [ENTER] to continue.
Standard Mode
Press [SPACE BAR] to select ANSI (ANNEX A) or ETSI (ANNEX B) and press
[ENTER] to continue. The Client side must match the Server side.