Prestige 791R G.SHDSL Router
Hardware Installation 2-1
Chapter 2
Hardware Installation
This chapter introduces the Prestige hardware and shows you how to make cable connections.
2.1 Installation Requirements
In addition to your Prestige package, your computer should include the following hardware and software:
• An Ethernet 10/100Base-T NIC (Network Interface Card).
• Communications software configured as follows: VT100 terminal emulation; 9600 Baud; No
parity, 8 Data bits, 1 Stop bit, no Flow Control.
2.2 Front Panel
The LED indicators on the front panel show the operational status of the Prestige.
Figure 2-1 Front Panel
To Next Page
Loading...
