Prestige 791R G.SHDSL Router
Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 15-5 Backup Configuration Example
Step 4. After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Then click Receive.
Choose the Xmodem protocol.
Type a location for storing the
configuration file or click Browse to
look for one.
Figure 15-6 Successful Backup Confirmation Screen
15.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your Prestige since FTP is
faster. Please note that you must wait for the system to automatically restart after the file transfer is
complete.
Firmware and Configuration Maintenance 15-7
To Next Page
Loading...
