Prestige 791R G.SHDSL Router
Remote Management 19-1
Chapter 19
Remote Management
This chapter covers remote management (SMT menu 24.11).
19.1 Remote Management Overview
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service
port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your Prestige from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
WAN only (Internet) ALL (LAN and WAN)
LAN only Disable (Neither)
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
19.1.1 Remote Management and Telnet Services
You can configure your Prestige for remote Telnet access as shown next.
Figure 19-1 Telnet Configuration on a TCP/IP Network
19.1.2 Remote Management and FTP Services
You can upload and download Prestige firmware and configuration files using FTP. To use this feature,
your computer must have an FTP client.
To Next Page
Loading...
