ZyXEL Communications Prestige 791R - Figure 18-3 Applying Schedule Set(S) to a Remote Node (Pppoe)

Prestige 791R G.SHDSL Router
Menu 11.1 - Remote Node Profile
Rem Node Name= ? Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit IP/Bridge= No
Multiplexing=VC-based Edit ATM Options= No
Service Name= Telco Option:
Incoming
A
pply your
schedule
sets here.
Allocated Budget(min)= 0
Rem Login= Period(hr)= 0
Rem Password= ******** Schedules= 1,2,3,4
Outgoing= Nailed-Up Connection= No
My Login=?
My Password= ******** Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 18-3 Applying Schedule Set(s) to a Remote Node (PPPoE)
You can apply up to four schedule sets, separated by commas, for one remote node. Change the schedule
set numbers to your preference(s).
18-4 Call Scheduling