Chapter 20 Parental Control
VMG8825-B Series User’s Guide
216
Figure 126 Parental Control Rule: Add/Edit Rule
The following table describes the fields in this screen.
Table 90 Parental Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select Enable or Disable to activate or deactivate the parental control rule.
Parental Control
Profile Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you select
Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all LAN users.
Rule List In Home Network User, select Custom, enter the LAN user’s MAC address, then click the Add
icon to enter a computer MAC address for this PCP. Up to five are allowed. Click the Delete icon
to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the VMG to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access (Authorized access) or
denied access (No access). Click the Add icon above the time bar to add a new time bar. Up
to three are allowed.
Network Service
Network Service
Setting
If you select Block, the VMG prohibits the users from viewing the Web sites with the URLs listed
below.
If you select Allow, the VMG blocks access to all URLs except ones listed below.
To Next Page
Loading...
