Chapter 20 Parental Control
VMG8825-B Series User’s Guide
217
Click Security > Parental Control > Add New PCP > Add New Service to open the following screen.
Figure 128 Parental Control Rule: Add/Edit Rule > Add Service
Add New
Service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Port of the new rule.
# This shows the index number of the rule.
Service Name This shows the name of the rule.
Protocol:Port This shows the protocol and the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Site/URL Keyword
Block or Allow
the Web Site
If you select Block the Web URLs, the VMG prohibits the users from viewing the Web sites with the
URLs listed below.
If you select Allow the Web URLs, the VMG blocks access to all URLs except ones listed below.
Add Click Add to show a screen to enter the URL of web site or URL keyword to which the VMG blocks
or allows access.
# This shows the index number of the rule.
WebSite This shows the URL of web site or URL keyword to which the VMG blocks or allows access.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Redirect
blocked site to
Zyxel Family
Safety page
Select this to redirect users who access any blocked websites listed above to the Zyxel Family
Safety page as shown next.
Figure 127 Zyxel Family Safety Page Example
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 90 Parental Control Rule: Add/Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
