ZyXEL Communications VPN2S - Set Up L2 TP VPN Tunnel on VPN2 S

6/63
www.zyxel.com
Set Up the L2TP VPN Tunnel on VPN2S
Go to Configuration> VPN> IPsec VPN > Default_L2TP_VPN_GW and
Default_L2TP_VPN_Connection > Edit, enable both of rule and fill the pre-share key on
Default_L2TP_VPN_GW.
Figure Configuration> VPN> IPsec VPN > Default_L2TP_VPN_GW