ZyXEL Communications WSQ50 - Configure Parental Control Schedule; Create Parental Control Profile

Chapter 7 Web Interface Tutorials – Multy M1 (WSM20)
Multy WiFi System User’s Guide
157
7.6 Configure Parental Control Schedule
This section shows you how to configure times for accessing the Internet using parental control.
7.6.1 Create a Parental Control Profile
Parental Control Profile allows you to set up a rule to schedule Internet usage. Use this feature to limit the
days and times a WiFi client can access the Internet through the Multy Device.
This example shows you how to block a client from accessing the Internet during time for studying. The
following example uses the parameters below to configure a Study schedule rule.
Note: Parental Control is not available if you are using bridge mode.
1 Go to Parental Control > Device to view the clients connected to your Multy Device. Find the client you
want to block then click the action icon ( ).
Table 15 Parental Control Example Parameters
BLOCKED CLIENT PROFILE NAME START BLOCKING END BLOCKING ENABLED ON
AmyPhone Study 8:00 am 10:00 pm from Monday to Friday