Chapter 9 Web Interface Tutorials – Multy M6E (WSQ65)
Multy WiFi System User’s Guide
220
1 Go to the Security > MAC Filter > MAC Filter screen. Under MAC Address Filter, select Enable.
2 Select Deny to block computer (B) from accessing your WiFi network.
3 Click Add to add a new entry. Select Active, and then enter the Host Name and MAC Address of
computer (B). Click Apply to save the changes.
9.4 Device Maintenance
This section shows you how to upgrade device firmware, back up the device configuration and restore
the device to its previous or default settings.
9.4.1 Upgrading the Firmware
Upload the router firmware to the Multy Device for feature enhancements.
1 Download the correct firmware file from the download library at the Zyxel website. The model code for
the Multy Device in this example is ACFK. Note the model code for your device. Unzip the file.
2 Go to the Maintenance > Firmware Upgrade screen.
To Next Page
Loading...
