Chapter 8 Web Interface Tutorials – Multy Plus (WSQ60)
Multy WiFi System User’s Guide
184
8.7 Add Clients to a Profile
Profiling clients allows you to easily block/allow Internet access or set a schedule for all client devices in
the same profile.
1 Click the Navigation Panel icon on the top-left corner ( ), and click Access Control to open the
Device screen. Use the Device screen to view all the clients in your Multy WiFi System. Specify which
network you want to view in the Connect to drop-down list.
2 Click More under the Action column to view more information about each device. On the Access
Control > Device Detail screen, select a predefined profile and click APPLY.
You can also activate Reserve IP, so the Multy Device assigns a specific IP address to a device every
time it connects to the Multy WiFi System. For more information on adding/editing new profiles, see
Section 8.8 on page 185.
To Next Page
Loading...
