Chapter 7 Web Interface Tutorials – Multy M1 (WSM20)
Multy WiFi System User’s Guide
167
3 Click Apply to save your changes.
7.10 Change the Web Configurator Local Password
Go to Settings > System > General Setting screen to change your Web Configurator local password.
Enter the Current Password and New Password and enter the new password again to confirm. You can
tap the Visibility( ) icon to see the hidden passwords. Click Apply to save the changes.
The password should be 8 to 32 single-byte or double-byte characters. Spaces are allowed. \”’‘<>^$&
and emojis are not allowed.
7.11 Change the Operating Mode
The operating mode refers to how the Multy Device is being used in the network. The Multy Device has
two operating modes:
• Standard: This is the Multy Device’s default mode. In this mode, the Multy Device routes traffic
between a local network and another network such as the Internet.
• Bridge: Use this mode so the Multy Device bridges traffic between clients on the same network.
Note: Parental Control, UPnP, and Port Forwarding functions are not available in Bridge
mode.
To Next Page
Loading...
