Chapter 9 Web Interface Tutorials – Multy M6E (WSQ65)
Multy WiFi System User’s Guide
206
• Employees (E) using the GENERAL WiFi network group will have access to the local network (LAN) and
the Internet.
• Visitors (G) using the GUEST WiFi network group with a different SSID and password will have access to
the Internet only.
Use the following parameters to set up the WiFi network groups.
1 Go to the Network Setting > Wireless > General screen. Use this screen to set up the company’s general
WiFi network group. Configure the screen using the provided parameters and click Apply. Note that if
you have employees using 2.4G and 5G devices, enable Keep the same settings for 2.4G and 5G
wireless networks to use the same SSID and password. Clear it if you want to configure different SSIDs
and passwords for 2.4G and 5G bands.
GENERAL GUEST
2.4/5G SSID Employee Guest
Security Level More Secure More Secure
Security Mode WPA3-SAE/WPA2-PSK WPA3-SAE/WPA2-PSK
Pre-Shared Key ForCompanyOnly guest123
To Next Page
Loading...
