Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
39
1 Access the Switch through http://192.168.1.1. Log into the Switch with the admin account.
2 Click Configuration > VLANs > VLAN Membership in the navigation panel. Click Add New
VLAN to create VLAN2.
3 Enter 2 in the VLAN ID field and enter a descriptive name in the VLAN Name field for the VLAN2
network.
4 Since the VLAN2 network is connected to port 1 on the Switch, select port 1’s check box under
Port Members to configure port 1 to be a permanent member of the VLAN.
5 Click Save to save the settings to the Switch.
5.4.1 Setting Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that the frames are
forwarded to the VLAN group that the tag defines.
To Next Page
Loading...
