ZyXEL Communications XGS4600 Series - Page 121

121/215
www.zyxel.com
3 The Classifier for upload traffic in VLAN 10: Check the “Active”
box and key in the Name. Set Layer 3 > Destination as
192.168.1.100/32 (Means the destination is FTPServer) and
Source as 192.168.10.0/24 (Means the source is from VLAN 10).
Press “Add”.
4 The Classifier of download in VLAN 20: Check the “Active” and
key in the Name. Set Layer 3 > Destination as 192.168.20.0/24
(Means the destination is in VLAN 20) and Source as
192.168.1.100/32 (Means the source is FTPServer). Press “Add”.
5 The Classifier of upload in VLAN 20: Check the “Active” and
key in the Name. Set Layer 3 > Destination as 192.168.1.100/32
(Means the destination is FTPServer) and Source as
192.168.20.0/24 (Means the source is from VLAN 20). Press
“Add”.