ZyXEL Communications XGS4600 Series - Configuration in Switch

29/215
www.zyxel.com
1.5.1 Configuration in Switch
1 Enter the web GUI and go to Menu > Basic Setting > IP Setup
> IP Configuration. Set the default Gateway as USG IP:
192.168.1.1. Then click “Apply”.
2 Go to Menu > Basic Setting > General Setup. Select “Use Time
Server when Bootup” to NTP(RFC-1305) and set the “Time
Server IP Address”. In this scenario, we use the google free
public NTP server (216.239.35.12) as an example. Also, select
the “Time Zone” in your location. Finally, remember to click
“Apply”.
3 Click Save to save the configuration.