Chapter 29 sFlow
XS3700 Series User’s Guide
256
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to reset the fields to the factory defaults.
Index This field displays the index number of this entry. Click on an index number to change the
settings.
Collector
Address
This field displays IP address of the sFlow collector.
UDP Port This field displays port number the Switch uses to send sFlow datagram to the collector.
Delete Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Cancel Click Cancel to begin configuring this screen afresh.
Table 131 Advanced Application > sFlow > Collector (continued)
LABEL DESCRIPTION
To Next Page
Loading...
