ZyXEL Communications XS3700 Series - Page 341

Chapter 40 VRRP
XS3700 Series User’s Guide
341
Figure 229 VRRP Configuration Example: One Virtual Router Network
You want to set switch A as the master router. Configure the VRRP parameters in the VRRP
Configuration screens on the switches as shown in the figures below.
Figure 230 VRRP Example 1: VRRP Parameter Settings on Switch A
Figure 231 VRRP Example 1: VRRP Parameter Settings on Switch B
After configuring and saving the VRRP configuration, the VRRP Status screens for both switches
are shown next.
172.16.1.100
172.16.1.1
172.16.1.10
EXAMPLE
EXAMPLE