EasyManua.ls Logo

19 Zoll-Tec AS-7100 Series User Manual

19 Zoll-Tec AS-7100 Series
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AS-7100 & AS-9100 series
Single- & Dual Rail
LCD KVM SWITCH
User Manual
19 Zoll-Tec GmbH,
Berlinstraße 19, 55411 Bingen / Germany
phone: 0049(0)6721/3092601 email: info@19zoll-tec.de

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the 19 Zoll-Tec AS-7100 Series and is the answer not in the manual?

19 Zoll-Tec AS-7100 Series Specifications

General IconGeneral
Brand19 Zoll-Tec
ModelAS-7100 Series
CategorySwitch
LanguageEnglish

Summary

Statement and Compliance

FCC Interference Statement

Details the FCC regulations and potential radio interference for the device.

ROHS Compliance

Confirms that the product adheres to RoHS environmental standards.

User Precautions

Product Model Description

Single-rail Series Models

Lists and describes models in the single-rail series.

Dual-rail Series Models

Lists and describes models in the dual-rail series.

Package Contents

About this Manual

Chapter 1: Introduction

Products Introduction and Overview

Provides an overview of the LCD KVM switch system, its features, and benefits.

Description of Terms

Product Features

Hardware Requirements

Console Requirements

Specifies the necessary console components for KVM operation.

Computer Requirements

Lists the required devices for each computer to connect to the KVM.

Cable Requirements

Details the types of connection cables provided or needed for the KVM.

Operation System Compatibility

Parts Identification

Front View Components

Identifies and describes the parts visible on the front of the LCD KVM.

Rear View Components

Identifies and describes the ports and components on the rear of the LCD KVM.

LCD Console Display Types

Single & Dual-rail Front Views

Illustrates the front views of 17-inch 4:3 and 19-inch 16:9 screens.

Dual-rail Slide and Rear Views

Shows the sliding mechanism and overall rear view of the dual-rail KVM.

Overall Dimensions

Single-rail Dimensions

Provides dimensional drawings for single-rail KVM console units.

Dual-rail Dimensions

Provides dimensional drawings for dual-rail KVM console units.

Chapter 2: Hardware Installation

Stacking and Installation Precautions

Important safety and preparatory steps before installing the KVM switch.

External Mounting Bracket Installation

Instructions for installing the KVM switch using external mounting brackets.

Built-in Mounting Bracket Installation

Instructions for installing the KVM switch using built-in mounting brackets.

Mounting and Fixing in Bracket Tail

Details on securing the KVM switch within the rack brackets.

Screw Mounting Position Instruction

Guidance on the correct screw placement for mounting brackets.

KVM Module Assembly and Disassembly

Procedure for assembling and disassembling the KVM module.

Keyboard Module Disassembly

Step-by-step guide to removing the keyboard module for maintenance.

Expansion Module Installation

Instructions for installing optional expansion modules, like IP modules.

Single Device Installation

General guide for installing a single KVM device.

VGA Port KVM Module Installation

Specific steps for installing a VGA port KVM module.

CAT5 Port KVM Module Installation

Specific steps for installing a CAT5 port KVM module.

DVI Port KVM Module Installation

Specific steps for installing a DVI port KVM module.

Single Port LCD KVM Switch Installation

Detailed installation guide for single port LCD KVM switches.

DVI Single Port LCD KVM Switch

Connection instructions for a DVI single port LCD KVM switch.

Cascade Device Connection

VGA Port Cascade Connection

Explains how to cascade VGA port KVM switches for extended control.

CAT5 Port Cascade Connection

Explains how to cascade CAT5 port KVM switches for extended control.

VGA LCD KVM Cascade Diagram

Illustrates the connection diagram for cascading VGA LCD KVM switches.

CAT5 LCD KVM Cascade Diagram

Illustrates the connection diagram for cascading CAT5 LCD KVM switches.

Chapter 3: Basic Operation

Hot Plug Functionality

Details the hot-plug capabilities for connecting/disconnecting components.

Connection Port Selection Methods

Describes various ways to select connected computers (manual, OSD, hotkey).

Manual Port Switching

Instructions on switching ports using front panel buttons.

OSD Menu Screen Selection

Guide to navigating and using the On-Screen Display menu.

Hotkey Selection

Explanation of different hotkey combinations for switching.

Power Off and Restart Procedure

Steps for safely powering down and restarting the KVM switch.

LCD Screen Opening Method

Instructions on how to open and adjust the LCD screen.

Chapter 4: OSD Operation

OSD Introduction and Login

Overview of the OSD interface and login procedures.

OSD Hot-Key Usage

How to activate and use OSD functions via hotkeys.

OSD Main Menu

Description of the main OSD menu structure and options.

OSD Functionality Overview

General explanation of available OSD functions for KVM control.

F1 GOTO Function

Using the F1 key to directly switch to a specific port by name or number.

F2 SCAN Function

Utilizing the F2 key for automatic port scanning of connected computers.

F3 LIST Function

Using the F3 key to filter and display specific ports in the OSD list.

F4 QV Function

Employing the F4 key to select ports for Quick View scanning.

F5 EDIT Function

Using the F5 key to create or edit port names.

F6 SET Function

Accessing system settings and configuration options via the F6 key.

OSD Activating Hotkey Settings

Configuring the hotkeys used to activate the OSD menu.

Switch Hotkey Settings

Customizing hotkey combinations for switching between computers.

Scan Duration Settings

Adjusting the time interval for automatic port scanning.

Password and Super Password Settings

Setting and managing user and administrator passwords for OSD access.

Port Name List Management

Clearing or managing the list of named ports within the OSD.

Restore Default Settings

Resetting OSD and system settings to their factory defaults.

Lock Console Functionality

Enabling and disabling the console lock feature via password.

Appendix

Safety Instructions

General safety guidelines for using the KVM switch and related equipment.

Cabinet Installation Guidelines

Instructions and precautions for mounting the KVM switch into a server rack.

Specifications

VGA Series Specifications

Technical specifications for the VGA series LCD KVM switches.

CAT5 Series Specifications

Technical specifications for the CAT5 series LCD KVM switches.

DVI Series Specifications

Technical specifications for the DVI series LCD KVM switches.

LCD Module Specifications

Warranty Conditions