24
2)) you will need to do it before removing the test strip.
Questionable or Inconsistent Results:
If your blood glucose result does not match how you feel,
please:
• Check the expiration date and the discard date of the test
strip. Make sure that the test strip vial has not been opened
for more than 6 months.
• Confirm the temperature in which you are testing is between
5 and 45°C (41-113°F).
• Make sure that the test strip vial has been tightly capped.
• Make sure the test strip has been stored in cool, dry place.
• Make sure the test strip was used immediately after
removing from the test strip vial or foil pouch.
• Make sure that you followed the test procedure correctly.
• Perform a control solution test (See Performing a Control
Test for instructions).
After checking all of the conditions listed above, repeat the
test with a new test strip.
If you are still unsure of the problem, please contact your local
dealer.
Removing the Used Lancet
Unscrew the lancing device cover. Place the safety tab of the
lancet on a hard surface and carefully insert the lancet needle
into the safety tab.
To Next Page
Loading...
