2N® Indoor View User Manual
•
•
•
•
1.3 Terms and Symbols Used
The following symbols and pictograms are used in the manual:
1.4 Safety Precautions
The manufacturer reserves the right to modify the product in order to improve its qualities. The
manufacturer continuously responds to the clients' requirements by improving the software.
Refer to the wiki.2n.com company websites for the latest 2N
®
Indoor View firmware and User
Manual.
Where necessary, the device can be installed at a safe distance from the prohibited area
and an Ethernet cable can only be carried to the required site.
Install2N
®
Indoor View out of reach of sensitive devices and human bodies as it emits
electromagnetic interference.
The permitted scope of operating temperatures is specified in chapter6. Technical
Parameters.
The device may not be operated at places exposed to direct sunlight or near heat sources.
•
Safety
Always abide by this information to prevent persons from injury.
•
Warning
Always abide by this information to prevent damage to the device.
•
Caution
Important informationfor system functionality.
•
Tip
Useful informationfor quick and efficient functionality.
•
Note
Routines or advice for efficient use of the device.